Bmg Five-Axis Servo Motor Molybdenum Wire CNC Wire-Cut EDM Wire Cutting Machine

Product ParametersGeneral Product ParametersModelBMG430ABMG530WBMG530BWBMG640WBMG640BWBMG850BWBMG1080BWWorkbench Size (mm)720x520779x529920x654879x5791050x7171520x7621780x1172Worktable travel (W*L) (mm)400x320500x350500x350600x400600x400800x5001000x800Maximum cutting thickness (mm)280300300300300400500Maximum load (kg)30050060080090015005000Z-axis travel (mm)200300300300300400 CNC500 CNCTravel of U, V Axes (mm)15x1570x7070x7070x7070x7070x7070x70Standard cutting taper (°/mm)±3°/100±10°/100±10°/100±10°/100±10°/100±10°/100±10°/100Diameter of molybdenum wire (mm)0.1-0.2Multi-knife cutting accuracy (mm)(Cr12, S=40)≤±0.003≤±0.003≤±0.003≤±0.003≤±0.003≤±0.005≤±0.005Repeat positioning accuracy (mm)≤±0.002≤±0.002≤±0.002≤±0.002≤±0.002≤±0.003≤±0.005Optimum surface roughness(μm)Ra≤0.8 (Optional 0.4)Processing speed (mm²/min)100-220Dimension(L*W*H) (mm)1818x1550x18701781x1593x20281781x1660x20301905x1715x20301920x1750x21002190x2100x27802962x2400x2495Weight (kg)≈1800≈1900≈2050≈2200≈2500≈3260≈6050Electrical power consumption (KVA)3Work tank capacity (L)120Kind of motorsstepservoservoservoservoservoservoCompany ProfileCertificationsProject CaseCooperative BrandPackaging & ShippingOur Services1. The samples can be processed according to the drawing requirements for free.2. The machine (including hardware and software) can be customized according to customer requirements.3. Provide free technical guidance and operation training to customers (including remote video and face-to-face).4. Machine parts (except worn parts) enjoy two-year warranty.5. If special problems cannot be solved through remote video, we will conduct door-to-door debugging and technical guidance according to the actual situation.6. Our purpose: Help customers become the NO.1 in the industry!FAQQ: It says the machine has automatic vertical alignment. How does it work?A: When you press the vertical automatic calibration button, the machine tool will automatically tilt the molybdenum wire to the edge of the upper part of the workpiece first, and then to the edge of the lower part of the workpiece. Finally, the system will automatically make the molybdenum wire parallel to the required machining surface after calculation, which can realize the automatic verticality calibration function. Please note: the upper and lower edges of the workpiece cannot be chamfered, and the surface of the workpiece must be flat. Otherwise, it is not recommended to use the vertical automatic calibration function, then you can manually calibrate the perpendicularity as usual.Q: In software pictures everything is in Chinese, can be changed to English?A: Yes, the system can be set to all English.Q: I'm interested to know more about transit wheels and tension system, usually tension at wire becomes a problem.A: The WEDM-MS is equipped with a mechanical tension mechanism as standard, and the WEDM-LS is equipped with an automatic tension sensing system, the material of the molybdenum wire is different from that of the brass wire, so their own tensile force are also different. After the molybdenum wire is installed, if the requirements are high Basically, the tension needs to be adjusted after 48 hours until the next replacement!Q: Does your machine use ruby or diamond nozzle?A: Yes, we use BMG diamond nozzle.Q: What's the life time of nozzles and wheels?A: Usually it needs to change the wheels after 3 months, and about 1 year need to change the nozzle, while the exact life time is according to the material of workpiece, use times and strength.Q: Machines from other factories have a small problem with Z-axis, it moves up and down but is not totally vertically, what about yours?A: The Z-axis part of our host adopts a linear guide to move up and down, so it can ensure that the Z-axis moves vertically up and down during processing.Q: About software and cpu maintenance: Does the software runs on Windows? And if software fails? Does machine has it's own backup?A: About the maintenance of software and hardware: it runs on Windows, and the hardware goes through strict repeated inspection and aging test before leaving the factory to ensure stable operation in the later stage; the software has one-key restore backup and archive backup, which can easily repair the faults caused by viruses and abnormal loss of files.Q: It says optional 0.4 roughness, what's the meaning? Does it need an extra accessory?A: The normal accuracy of our WEDM-MS is 0.4-0.8. The surface roughness is related to the material of the workpiece and the experience of the operator, but it will not exceed 0.8, (for example if the workpiece not very thick and operator has enough experience then also can process the surface to 0.4). If it needs to reach 0.4 steadily, I suggest that it needs to be modified, or our low-speed wire cut EDM machine tool can be used directly.Q: Your machine is ready for all materials?A: Yes, our machine is ready for all materials which can be processed electrically. The processing database is one of our uniqu