21.5 Inch Industrial LCD Display Pcap Touch Screen Monitor with Remote OSD

 Product Description     21.5 Inch Industrial LCD  Display PCAP Touch Screen Monitor Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.Keep this equipment away from humidity.Put this equipment on a reliable surface during installation. Dropping it or letting if fall may cause damage.The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.Position the power cord so that people cannot step on it . Do not place anything over the power cord.All cautions and warnings on the equipment should be noted.If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over voltage.Never pour any liquid into an opening. This may cause fire or electrical shock.Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.If one of the following situations arises, get the equipment checked by service personnel:The power cord or plug is damaged.Liquid has penetrated into the equipment.The equipment has been exposed to moisture.The equipment does not work well, or you cannot get it to work according to the user's Manuel.The equipment has been dropped and damaged.The equipment has obvious signs of breakage.13. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -10ºC OR ABOVE 50ºC. THIS MAY DAMAGE THE EQUIPMENT. Detailed PhotosProduct Parameters General SpecificationsModelCOT215E-COK04SeriesOpen Frame,IP65 Water-proof & Vandal Proof LCD Type21.5" a-Si TFT-LCDVideo InputVGA, DP , HDMI and Remote OSDOSD controlsBrightness, Contrast Ratio, Auto-adjust, Phase, Clock, H/V Location, Languages, Function, ResetPower SupplyType: External brickInput (line) voltage: 100-240 VAC, 50-60 HzOutput voltage/current: 12 volts at 4 amps maxMount Interface1)VESA 75mm and 100mm2)Mount bracket, horizontal or vertical (Kiosk Mounting)LCD SpecificationActive Area(mm)476.64(H)×268.11(V)Resolution1920(RGB)×1080 (60Hz)Pixel Pitch(mm)0.24825(H)×0.24825(V)Viewing angle (v/h)89°/89°/89°/89°(CR>10)Contrast1000:1Luminance(cd/m2)250Response Time(Rising)3.6ms/1.4msSupport Color16.7M colorsBacklight MTBF(hr)50000Touchscreen SpecificationTypeCJTouch Projected Capacitive touch screen with 3mm Vandal Proof Glass Multi touch10 points touchTouch Life Cycle50 millionsTouch Response time7msTouch System InterfaceUSB interfacePower consumption+5V@80mAExternal AC Power AdapterOutputDC 12V /4AInput100-240 VAC, 50-60 HzMTBF50000 hr at 25°CEnvironmentOperating Temp.-10~55°CStorage Temp.-20~60°COperating RH:20%~80%Storage RH:10%~90%Techinical DrawingsCompany ProfileDongguan CJTouch Electronic Co., Ltd. is a leading provider of Touchscreen, Touch monitor and All-in-one computers. Established in 2009 and headquartered in Dongguan, China, CJTouch has proven to be reliable and trustworthy partners to help seamlessly integrate our products into your total solution. Over 10 years of combined experience in researching and developing touch-enabled screens and monitors. Two factories with over 200 skilled and qualified employees, including R & D engineers, technical experts and sales representatives. Production workshopCertificationsPackaging & ShippingWhat We can offer IR touch screen/Frame SAW touch screen PCAP touch screen panel 4wire/5wire resistive touch screen PCAP/NANO touch foil/film PCAP flat screen touch monitor SAW touch screen monitor IR Open frame touch display Desktop touch monitor Desktop all in one touch PC PCAP all in one touch computer Bar lcd panel High brightness advertising player/advertising machine Curved touch display Full bonding TFT lcd panel with touch screens Touch monitor with mirror OEM/ODM/Customization