Thermostat Control Microcomputer Digital Temperature Controller for Incubator Cooling and Heating 12V /24V / 220V

Product DescriptionHow to set the controller?1. Set the start temperature:Press Up button show the starting temperature;long press UP button the temperature display Flashing , press the UP or Down button to set the start temperature value. 2. Set the stop temperature:Press Down button show the Stop temperature;long press Down button the temperature display Flashing , press the UP or Down button to set the stop temperature value. 3. Restore factory settings:Long press the  Up and Down bottons when the controller is powered, the display shows "888"  and switch to detection temperature. 4. Start temperature < stop temperature = heating mode 5. Start temperature > stop temperature = refrigeration modeProduct Parameters  Model  W3002  Input power  AC 220V   DC 12V  DC 24V (Optional)  Temperature measurement range  - 50 ~ 110°C  Temperature control range  - 50 ~ 110°C  Temperature measuring accuracy  ±0.2 °C  Temperature control precision  ±0.1 °C  Measuring input  NTC10K, 1 meters long waterproof probe  Output Type  Direct Output  Output Capacity  Max 10A AC 220V  or  DC 12v 24v   Appearance size  60 * 45 * 31 mmFeatures1.Heating/refrigeration modes, users can set the start/stop temperature freely;With large and clear LED display for better readability 2.Easy to use:Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time. Two Work Mode:Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) 3.Applycation:Waterproof sensor, can be used to detect water or other liquid non-corrosive. objects temperature, for aquaculture,ornamental fish and other Detailed PhotosCompany ProfileMain ProductsContact Us  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1