Diamond Wire Saw For Granite QuarryingThe advantages of wire saw
granite mining:1 Wide adaptability;2 High mining efficiency3
Flexible cutting method4 Large cutting depth5 High output6 Low
comprehensive cost7 Environmental protection and no
pollution.Product features:1. Fast-cutting speed and long lifespan,
low noise, and eco-friendly.2. Stable quality control for excellent
cutting performance, highly cost-effective.3. Suitable for cutting
all kinds of stone.How to use diamond wire saw for
mining:Quarry&mining is a major project that requires a lot of
manpower and material input. For example, roads must be built
first. If there is no road near the mine, then even if the stone is
extracted, there is no way to transport it out. It just needs
water, electricity, no electricity, large machinery can not work,
without water, the cutting process cannot be cooled, the stone
cannot be cut, and mining is impossible.After the above basic
conditions are met, there are prerequisites for mining. In general,
diamond wire saw mining can be divided into four steps, namely,
drilling, threading through holes, installing equipment cutting,
and adjusting. The following article gives a specific introduction
to quarry mining:The first is drilling. drilling is a key
preparatory work. If the hole is not well drilled, it will directly
affect the penetration of the diamond wire saw and affect the
service life and cutting efficiency of the wire saw. Therefore, the
process of punching is particularly important. for cutting a large
block, it needs to make three holes, one vertical hole, and two
horizontal holes.Secondly, the diamond wire is threaded and
perforated. At present, we mostly use the manual method of
threading, fixing one end of the rope with a multi-strand loop
cord, passing it in from one hole, and using iron wire to lead out
from the other hole. In foreign countries, there is a method of
animal threading, like the mouse is tied to a wire and filled with
water to allow the mouse to drill out of another hole.Then install
the wire saw machine. because the equipment is heavy, and after
cutting a flat surface, the equipment needs to be re-adjusted, so
it requires lifting equipment around it, which can be lifted at any
time. After the equipment is installed, you can start cutting.
Generally, the horizontal cutting is performed first, and then the
vertical cutting is performed to prevent the wire saw from idling
or jamming the beaded rope after the vertical cutting at the final
stage of the horizontal cutting process. Must pay attention to the
water supply during the cutting process, otherwise, the large
amount of heat generated by the cutting will cause the steel wire
to deform, or the rubber will age, and the spring will melt and
lose the role of fixing the beads, which will shorten the life of
the wire saw.Adjustment, In the process of mining, the bending
angle of the wire saw is constantly shrinking. In the last part,
the bending angle of the wire saw is very large, so at this time,
we must pay attention to the running state of the wire saw. If
there are sparks or the sound of the wire saw cutting is too large,
it is best to find a good location and add a flywheel, so as to
keep the wire saw from over-bending and causing deformation,
thereby shortening the service life.Product specification for
granite:Diameter(mm)Bead
No(pcs/m)ReinforcementUsageD11.537/40Rubber/Rubber+springGranite/quartz quarryingD12.038/40Rubber/Rubber+springGranite/quartz quarryingD12.538/40Rubber/Rubber+springGranite/quartz quarrying Cutting
materialLine
speedEfficiencyLifeClass1-233-3515-2825-35Class3-431- 328-1215-25Class528-306-1010-15
/* March 10, 2023 17:59:20 */!function(){function s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about 12.0mm Bead Rubber Spring Fixed Granite Diamond Wire Saw
- 24*7.5*10mm Diamond Segments for Marble Cutting Slabs
- 24*7.5*10mm Diamond Segments for Marble Cutting Slabs
- Diamond Core Drill Bit for Granite Marble Stone Drilling Tools
- Diamond Core Drill Bit for Granite Marble Stone Drilling Tools
- Stone Cutting Machines
- 45kw 55kw 75kw Wire Saw Machine for Stone Quarrying&Mining
- 45kw 55kw 75kw Wire Saw Machine for Stone Quarrying&Mining
- Automatic Stone Grinding Polishing Machine for Granite Marble Slab Poshlier Line