63.3kw Swimming Pool Heat Pump with Titanium Heat Exchanger

AirValley Swimming pool heat pump, With R410A refrigerant, maximum water output temperature 40 deg C(higher water output temperature for option).Product DescriptionIntelligent defrosting technology to reduce heating attenuationAir source heat pump units are prone to frosting when the air density is low and the humidity is high. The air-cooled heat pump module unit can accurately judge the defrosting timing according to the main parameters of the heating operation and the load change, so as to achieve defrosting with frost and normal heating without frost, and can perform forced manual defrosting according to the actual situation.Modular design, more flexible installationUnit modules of different capacity specifications can be freely combined, and a maximum of 16 units can be connected in parallel, with strong compatibility and scalability. According to the site characteristics of the installation site, the user can choose a variety of combination connection methods to realize the parallel use of 1-16 modules, and the maximum cooling capacity is as high as 2080kW, fully meeting different needs. The air source module units of the same system are started in stages and run in a balanced manner, reducing the impact of the starting current of the units on the power grid.Modular rotation workAccording to the load conditions of the system, the unit rotates the module units that are turned on first, and distributes the running time of each module unit in a balanced manner, which greatly improves the reliability and service life of the unit.Building intelligent control to improve management reliabilityModbus is an open protocol that is widely used, especially in BMS building control systems. The unit can be connected to the BMS system through the Modbus protocol to realize remote control of multiple air cooling and heat pump modules.  Panasonic compressor: "Small size" "Big horsepower"! Relying on the mature technology of B series. More optimized motor design. Excellent vibration and noise characteristics. High reliability bearings, increased oil pool volume.Multiple protection functionsTo ensure the safe operation of the system, a modular structure is adopted, and the units are started in stages to reduce the impact of the starting current of the units on the power grid. The unit is equipped with high and low pressure switches, antifreeze protection devices, water flow switches, overload protection devices, power supply phase sequence protection devices, etc., and is equipped with an operation control device. When a fault occurs, the controller will automatically alarm in real time.Wifi function for optionControl your heat pump in your smartphone anywhere, anytime.High precision electronic expansion valveHigh precision electronic expansion valve: use electronic expansion valve for controlling, reach 500 steps adjustment, adjust super heat degrees accurately, achieve high efficiency operation system.   Titanium tube heat exchangerAdopt professional material of PVC for the shell, which meets the requirements of environmental protection ROHS. PPR material for option for pool temperature requirement higher than 45 deg C, long lifetime for the heat exchanger; One-step forming top cover and base cover, can work under pressure of 2.5Mpa; Pure titanium seamless tube, acid and alkali resistance, good corrosion resistance, can work under refrigerant pressure of 5.3Mpa.Fin Heat ExchangerThe blue hydrophilic aluminum foil fin heat exchanger adopts cross type multi-flow path design to make the heat exchange more uniform; the internal thread copper tube design has higher heat transfer efficiency; at the same time, the hydrophilic fins are not easy to form water droplets, Spreading into a uniform water film completely on the surface of fins, eliminates the generation of water bridges, which greatly improves the heat exchange capacity and heat exchange efficiency between the aluminum foil and the flowing air.  Company ProfileAirValley is a heat pump manufacturer focusing on OEM and ODM. We have excellent R&D engineers and cooperate with excellent components manufacturers to provide customers with cost-effective products, and can provide customized services according to customer requirements. All of our current sales and R&D engineers have worked in the heat pump industry for more than 10 years, and we can provide professional and timely products and services. We have set up a professional 15HP heat pump laboratory, and at the same time have strategic cooperation with Dan-foss China. All DC Inverter commercial units have been tested for a long time in Dan-foss local laboratory to ensure the product's ultra-high performance and strong stability. We look forward to working with you!Our AdvantagesAdvanced Production LineWork flow chartThe cooperation of Dan-foss & AirValleyThe commercial DC Inverter heat pump were supported by Dan-foss, the heart of heat pump - Compressor comes from Dan-foss, and the economizer of EVI system comes from