93618759 Air Oil Separator Relacement for Ingersoll Rand Screw Air Compressor Replacement Spare Parts

High Quality OEM Screw Air Compressor Parts Air Oil Separator 93618759 for Ingersoll Rand  Product DescriptionMaintenance of the oil separatorThe oil separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil and gas separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air affect its life, Have a huge impact.It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a pre-air filter is considered.The oil separator must be replaced when it expires or the pressure difference between the front and back exceeds 0.12Mpa.Otherwise, the motor will be overloaded, the oil separator will be damaged and the oil will run out.  High Quality Oil Separator 93618759 For Ingersoll Rand Compressor Oil SeparatorReplacement P/N93618759Applicationapply for  air compressor partsResidual Oil7000h  Cross referenceCompatibility with other filters:Atlas Copco 6221375400Bauer N09003Bauer DV 750Bea K20L3005020Blitz Schneider 758163Boge 575000208Boge 575000210Boge 5750002668PBottarini 221000Ceccato 2200640559Ceccato 6221375450Ceccato 640125Ceccato 640559Compair-Demag 00614874Domnick Hunter 55016Donaldson P525768Ecoair BN16273Ecoair N09003Ecoair 93568251Ecoair 93618759Ecoair 93501807Ecoair BN09003Fai Filtri DFN-300500-0WFilsan FS537Filsan FS541Grassair 0701525HiFi Filter OS 5191Ingersoll Rand 93501807Ingersoll Rand 93568251Ingersoll Rand 93568269Ingersoll Rand 93618759Maco Meudon 520854Maco Meudon 528647Mahle 5073457Mann Filter LE 48 004 XMann Filter 4900051191Mann Filter 4900455181Mark 2200640559Mark 6221375450Mark 640559Mark 640125Noitech NS 002720Purolator 852470Rotorcomp R12268Rotorcomp R12708SF Filter SAO52027Sotras DB 2027Sullair 1085Worthington 220090012Worthington 220091012Worthington 220092012Worthington 411088Worthington 6211369900Worthington 6241108800 How to repair or replace the oil separator? Open separator container and replace separator filter.Make sure the new filter is the same size as the old filter, no matter how long or short, make sure to adjust the length of the scavenger.Be sure to use the shim provided, as these shim contain metal conductors, which prevent the accumulation of static electricity in the separator, which may cause sparks or explosions in the separator vessel.  Detailed PhotosReplacement steps of the built-in oil separator:Stop the screw air compressor, close the outlet of the air compressor, open the drain valve, and confirm that the system has no pressure.Disassemble the pipeline above the oil and gas barrel, and at the same time remove the pipeline from the outlet of the pressure maintaining valve to the cooler.Remove the oil return pipe of the air compressor.Remove the fixing bolts on the oil and gas barrel, and remove the upper cover of the oil and gas barrel. Remove the oil and gas separator and replace it with a new one.Install them in the order of removal.   More Products for Choose9362375993568301935198669275468893627941935683019351986692754688936279419356831993519874927546969367721993568319935198749276578393682771935683359352077392785328936827719356833593520773928082869369517993568343935207819282447393695179935683439352078192866508402351012935782929352079992866508402351012935859589352079992871326BK2253101935859669352080792890334BK3297202935859669352080792963396BK3297202936049659352290293188019BK3712300936049659352290293485407BK3712300936055589352290293489607BN19940936055589352290293489607BN19940936063909352565793501807BN20660936063909356824493504231BN20660936110289356825193504231BN24858936110289356825193514529BN2485893612844935682699351452993618759936181719356826993516342936188589361817193568277935163429361989893618718935682779351644193619898936187189356829393516441936200379361827093568293935168629362003793618270935683014284380593621514936187599356830193519866Tips:         This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time. Scavenge line too shortScavenge line does not reach into internal bowl at the base of the separator.Result: high oil carry overScavenge line too longEnd of scavenge line seats against base of bowl forming a seal. No oil, or an insufficient quantity is sucked up by the scavenge line. Compressor manufacturer's gap clearance is normally 1 to 2 mm alternatively, ensure tapered cut to end of scavenge line.Result: high oil carry overScavenge line blocked with dirtResult: high oil carry overScavenge line filter blockedSome compressor models are fitted wit a small stainless steel mesh filter at some