NEMA 7 Pin Base Plug Housing Photoelectric Switch Lighting Photocontrol System

ANSI C136.41 Standard, NEMA photocontrol cover and 7pin base for street lighting control.Basic Specification:Loading Capacity15Amp Max.Ambient Temperature-40ºC ~ +80ºCHolding CoverPolycarbonateRated Voltage0 ~ 480VAC Max.IPIP65StyleNEMA standardMaterialPolycarbonate1. Materials of cover has UL approved, suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.2.The base material:PBT, Add an UV stabilizer, UL 94V-0 flamerating  Copper contact materials: brass H62  Conductive Dimming Pins - Phosphor bronze, four provided,0.25mm thick with gold and tin plating and nickel under-plating  Elastic body O Thermoplastic Elastomer Runner, designatedSantoprene 251-80W232, Secured together with base by molding.  All 7pins of base are sealing with glue, much better  waterproof degree.1000W/1800VA for power contacts 250mA@30VDC for signal contacts BASE MATERIAL:PBT with 30% glass fiber (UL94 V-0 rated) GASKET MATERIAL:Thermal Elastomer (105ºC rated, UL recognized) Epoxy Product Pictures:All the JL-240 series photocontrol receptacles were designed for the lanterns those intended to have anANSI C136.10-2006 receptacle to fit a twist-lock photocontrol. This series conform newly published ANSIC136.41-2013 to allow a LED lamp multi-controlled through the receptacle.This series offers 2 or 4 gold-plated low voltage pads on the top surface to fit photocontrol has ANSIC136.41 conforming spring contacts, and offers male quick connectors at rear back for signal connection.This series also offers 360 degree rotation limiting feature to conform ANSI C136.10 requirements.Both JL-240X and JL-240Y have been recognized, and JL-200Z14 has been listed by UL to applicable USand Canadian safety standards, under their file E188110, Vol.1 & Vol.2.Item No.JL-240X/JL-240Y/JL-240Z14Applicable Volt Range0~480VACRated Frequency50/60HzPower LoadingAWG#14: 15Amp max. / AWG#16: 10Amp max.Optional Signal LoadingAWG#18: 30VDC, 0.25Amp max.Ambient Temperature-40ºC ~ +70ºCOverall Dimensions (mm)65Dia.x 40              65Dia.x 67Accessory:             Rear Cover° R option                      °                              ° R option Spring Holder      -                                                         °                                                   - Wall mount Back Cover      -                         -                              ° Lock Nut      -                         -                              ° Wall Mount Bracket      -                         -                              ° 30x(70+130)Leads6" Min. (See Ordering Information) Installation:  Disconnect power; wire the receptacle accordingto the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used toassist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle.Adjust the receptacle position if necessary.JL-240Y series supports tool-free rotation.JL-240Z series supports Wall-mount and rotation. /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1