Inconel 625 Solid Nickel Alloy Welding Wire Ernicrmo-3 Nickel Base Alloy Covered Welding Wire

Inconel 625 Solid Nickel Alloy Welding Wire Ernicrmo-3 Nickel Base Alloy Covered Welding WireProduct DescriptionNickel-based alloy welding wire has good properties of resistance to reactive gas, caustic medium, and corrosion resistance of reducing acid medium, and has the characteristics of high strength, good plasticity, hot and cold deformation, processing and welding. Therefore, it is widely used in In petrochemical, metallurgy, atomic energy, marine development, aviation, aerospace and other industries, it is a very important corrosion-resistant metal material to solve engineering corrosion problems that general stainless steel and other metals and non-metallic materials cannot solve. Nickel-based alloys refer to alloys that are based on nickel and contain alloying elements and are resistant to corrosion in some media. When classified by their chemical composition characteristics, there are mainly nickel, nickel-copper alloys, nickel-molybdenum (nickel-molybdenum-iron) alloys, nickel-chromium (nickel-chromium-iron) alloys, nickel-chromium-molybdenum (including nickel-chromium-molybdenum alloys and nickel-chromium-molybdenum-copper alloys) ) and nickel-iron-chromium (that is, iron-nickel-based alloys) and other categories. Pure nickel wire ERNi-1 is used for welding 200, 201 nickel alloys and nickel-plated steel plates; welding of steel and nickel dissimilar materials; surfacing of steel. Nickel copper wire ERNiCu-7 welding of Monel 400 alloy itself; and welding of Monel 400 alloy and steel; used for surfacing of steel. Nickel-chromium wire ERNiCrFe-3 for welding dissimilar materials in creep-resistant joints; - welding of austenitic, ferritic steels and high-nickel alloys, welding of 9% nickel-containing alloy steels ERNiCrFe-7 for alloys welding and surfacing of steel, especially for the construction of nuclear reactors. Nickel-chromium-molybdenum welding wire ERNiCrMo-3 INCONEL625, INCONEL825, INCONEL25-6Mo and MONEL400 alloy welding; - welding between ultra-high strength austenitic steel and INCOLOY020 alloy; welding between nickel-based alloys and stainless steel dissimilar materials; steel stacking weld.Welding rod / Welding Electrode Advantages:1. Stable arc, less splash2. Shaped good appearance3. Easy for removal of slag layer4. Easy for striking arc and restriking arc.5. Operable with low amperages on sheet metal6. Slag control accommodates vertical down weldingNickel and Nickel Alloy Welding Wire Product Model(AWS) Application ERNiCr-3 For welding 600, 601 and 800 alloys themselves, and welding dissimilar steels between stainless steel and carbon steel ERNiCrFe-7; For welding Inconel alloys within ASTM B163, 166, 167 and 168 ERNiCrFe-6 For welding of steel and Inconel, welding of steel and stainless steel and nickel-based alloys ERNiCrCoMo-1 Dissimilar welding for welding nickel-chromium-cobalt-molybdenum alloys and various superalloys ERNiCrMo-3 It is used for welding of nickel alloy, carbon steel, stainless steel and low alloy steel, mainly used for welding of 625, 601, 802 alloy and welding of 9% nickel alloy ERNi-CI Industrial pure nickel for welding malleable and grey cast iron ERCuNi For welding of 70/30, 80/20, 90/10 copper-nickel alloys ERNiCu-7 For welding nickel copper alloys B127, 163, 164 and 165 etc. ERNi-1 For welding of pure nickel castings and forgings such as alloys within ASTM B160, 161, 162, 163 ERNiFeMn-CI For welding of nodular cast iron, ductile iron, malleable cast iron and grey cast iron to itself or to stainless steel, carbon steel, low alloy steel and various nickel alloys ERNiCrMo-4 For welding nickel-chromium-molybdenum alloy itself, or welding nickel-chromium-molybdenum alloy and steel and most other nickel-based alloys ERNiCrMo-11 It is used for welding of nickel-chromium-molybdenum alloy itself, or welding of nickel-chromium-molybdenum alloy and steel and most other nickel-based alloys, and can also be used for surfacing welding of nickel-chromium-molybdenum alloy and steel welding seam ERNiCrMo-13 For welding low carbon nickel chromium molybdenum alloys More Products:Copper Welding Wire/Rod                                                    Nickel welding Wire/Rod                                          Aluminum Welding Wire/RodWhen classified by their chemical composition characteristics, there are mainly nickel, nickel-copper alloys, nickel-molybdenum(nickel-molybdenum-iron) alloys, nickel-chromium (nickel-chromium-iron) alloys, nickel-chromium-molybdenum (includingnickel-chromium-molybdenum alloys and nickel-chromium-molybdenum-copper alloys) ) and nickel-iron-chromium (that is,iron-nickel-based alloys) and other categories. Pure nickel wire ERNi-1 is used for welding 200, 201 nickel alloys and nickel-plated steel plates; welding of steel and nickeldissimilar materials; surfacing of steel. Nickel copper wire ERNiCu-7 welding of Monel 400 alloy itself; and welding of Monel 400 alloy and steel; used for surfacing of steel. Nickel-chromi