DescriptionCATV High-class 4Way AGC Outdoor Optical Receiver
(DT-HORL-8604R), It is the main equipment to build the CATV
network,(Forward optical receiver part:Optical
Parameter,Receiving Optical Power:-9 ~ +2dBm,
Optical AGC Range:-7/-8/-9 ~ +2dBm (adjustable),
Optical Receiving Wavelength:1100 ~ 1600nm,Optical Connector Type:
FC/APC, SC/APC or specified by the user,RF Parameter:Frequency
Range:45 ~862MHz OR 1003MHz, Rated Output Level:≥ 108dBμV, Max
Output Level:≥ 114dBμV),(Return Optical
Transmitter Part:Optical Parameter, Optical Transmit
Wavelength:1310±10nm, 1550±10nm or specified by the user, Optical
Connector Type:FC/APC, SC/APC or specified by the
user, RF Parameter: Frequency Range: 5 ~
65MHz OR specified by the user,Input Level:72~
85, General Performance: Supply Voltage:A:
AC (150~265)V; B: AC (35~90)V,
Dimension:340mm (L)x235mm (W)x140 mm(H), Add
SNMP (Network Management) is optional,Power Plug:European
standard Plug or American standard Plug is
optional.DT-HORL-8604R is our latest high-grade four-output
CATV network optical receiver. The pre-amplifier adopts full-GaAs
MMIC, post-amplifier adopts GaAs module. Optimized circuit
design coupled with rich professional design experience, make
the equipment achieve good performance indexes. Microprocessor
control, digital display the parameters, the engineering debug is
especially easy. It is the main equipment to build the CATV
network.★Performance Characteristics⊙Reserved EOC functional unit
(optional).⊙High response PIN photoelectric conversion
tube.⊙Excellent AGC performance, the AGC range is -9~+2dBm
adjustable.⊙GaAs amplifier device, power doubler output, with high
gain and low distortion.⊙Specialized RF attenuation chip, with good
RF attenuation and equilibrium linear, high accuracy.⊙Optimized
circuit design, SMT process production, optimized signal path, make
the photoelectric signal transmission more smooth.⊙Reserved data
communication interface, can connect with class network
management responder, access to network management system.⊙Return
path can select burst mode to sharply decrease the noise
convergence and greatly improve the quality and reliability of the
network operation.⊙Single Chip Microcomputer (SCM) control
equipment working, LCD display the parameters, convenience and
intuitive operation, and stable performance.★Technique
ParametersItemUnitTechnical ParameterForward optical receiver
partOptical ParameterReceiving Optical PowerdBm-9 ~ +2Optical AGC
RangedBm-7/-8/-9 ~ +2 (adjustable)Optical Return
LossdB>45Optical Receiving Wavelengthnm1100 ~ 1600Optical
Connector Type FC/APC, SC/APC or specified by the userFiber
Type Single ModeLink PerformanceC/NdB≥ 51 (-1dBm
input)C/CTBdB≥ 65Output level 108dBμVEQ 8dBC/CSOdB≥ 60RF
ParameterFrequency Range MHz45 ~862/1003Flatness in
BanddB±0.75Rated Output LeveldBμV≥ 108Max Output LeveldBμV≥
114Output Return LossdB(45 ~550MHz)≥16/(550~1000MHz)≥14Output
ImpedanceΩ75Electronic Control EQ RangedB0~15Electronic Control ATT
RangedB0~15Return Optical TransmitterPartOptical ParameterOptical
Transmit Wavelengthnm1310±10, 1550±10 or specified by the
userOutput Optical PowermW0.5, 1, 2Optical Connector
Type FC/APC, SC/APC or specified by the userRF
ParameterFrequency Range MHz5 ~ 65 (or specified by the
user)Flatness in BanddB±1Input LeveldBμV72~ 85Output
ImpedanceΩ75NPRDynamic RangedB≥15 (NPR≥30 dB)Use DFB laser≥10
(NPR≥30 dB)Use FP laserGeneral PerformanceSupply Voltage
VA: AC (150~265)V; B: AC (35~90)VOperating
TemperatureºC-40~60Storage TemperatureºC-40~65Relative Humidity%Max
95% no condensationConsumptionVA≤ 34Dimensionmm340 (L)x235 (W)x140
(H)Note: The forward RF parameters are tested under the condition
of using NEC module in the last stage.Use other module, the
parameters will be slightly different.★Order informationItemDAYTAI
ModelDescription1DT-HORL-8604Without Return Part2DT-HORL-8604RWith
Return Part3Optional Configuration: 4Forward optical
receiver partOptical ParameterOptical Connector TypeFC/APC,
SC/APC or specified by the user5RF ParameterFrequency Range45
~862MHz OR 1003MHz6Return Optical Transmitter PartOptical
ParameterOptical Transmit Wavelength1310±10nm, 1550±10nm or
specified by the userOptical Connector TypeFC/APC, SC/APC or
specified by the userRF ParametersFrequency Range5 ~ 65MHz (or
specified by the user)7SNMPAdd SNMP (Simple Network Management
Protocol) is optional8FP(G) isolationAdd Return path optical
transmit modules FP(G) isolation is optional9Power SupplyA:
AC (150~265)V; B: AC (35~90)VEuropean standard Plug or
American standard Plug is optional★Our Exhibition★Packing &
ShippingQ1: What's the delivery time?Re:The lead time is 10~15
days after order confirmed.Q2: Can you send me a free sample?Re: We
are willing to send you free sample, if you would like to pay
the shipping costs.Q3: What's your payment terms?Re: 30% in
advance, and 70% before shipment.Q4: What's the payment method?Re:
We accept T/T, Western Union, and Paypal.Q5: How to ship the items
to me?Re: C
Related products about Outdoor 4 Way CATV Optocal Receiver with AGC
- Smartax Ma5800 Series Gpon Olt Ma5800-X15 Chassis
- High Speed HDMI Cable for HDMI to Mdmi Connector
- Rg59 RG6 Types of Coaxial F Compression Connector
- Digital TV Headend 8/16/24 Way HDMI Input ISDB Encoder Modulator
- Digital TV Headend 8/16/24 Way HDMI Input ISDB Encoder Modulator
- Digital Broadcasting Network 8 Non Adjacent Carrier 8 in 1 ATSC Multiplexing RF Modulator
- Digital Broadcasting Network 8 Non Adjacent Carrier 8 in 1 ATSC Multiplexing RF Modulator
- Cable TV Digital Head-End Broadcasting Video Audio 8 HDMI Input Multi Channel Encoder