Htdy-H High Voltage Switch Operating Power Supply

Brief introduction The high voltage switch operating voltage test (commonly known as "low voltage test") is a basic preventive electrical test to ensure the safe operation of the high voltage circuit breaker of the power system. At present, the power sector basically uses the following two methods to test:1. Use the DC system of the field control cabinet as the test power supply, and test the voltage by the sliding line varistor. The biggest drawback of this method is that if the field test wiring is short-circuited or DC direct grounding, it will directly affect the entire DC system. If it is light, the high-voltage equipment on the site will be lost, and the DC system will collapse.2. Using on-site AC power, using a voltage regulator for simple silicon rectification and direct output DC, the disadvantages of this method are: The regulator is heavy, inconvenient to use, and the output DC ripple is large. The input and output are not isolated, and the casing may be charged, endangering personal safety.In view of the above situation, our company has developed a new generation of high-voltage switch closing power supply, providing test power supply for on-site high-voltage switch and opening and closing operation test, avoiding direct use of DC system in the field control box, effectively preventing possible on-site The hazards created by the DC system provide conditions for the safe operation of field devices.Products features1. The high-voltage switch dynamic characteristic tester is a dedicated power supply designed for testing and repairing high-voltage circuit breakers and their operating mechanisms.2, the input and output are completely isolated, and the output DC is stable and reliable.3, the ripple factor is small4, overcurrent and overvoltage protection5, the wiring is simple, easy to operate6, beautiful appearance, light weight, easy to carryProduct parametersOperating conditionsPower220VTemperature-10ºC-+45ºCHumidity