Product Parameters ELECTRICAL DATA Connector 1
Series7-16 DINConnector 1 StyleStr FemaleCable Type.086"
CableConnector 2 Series-Connector 2 Style-Contact
TerminationSolderShield TerminationCrimpImpedance (Ohms)50Low
PIMYesMax Frequency6 GHzWorking Temperature-65°C to
+165°C MATERIAL DATA Body MaterialBrassBody
FinishNickel/Ternary alloyContact MaterialPhosphor Bronze/Beryllium
CopperContact FinishGold/SilverInsulator MaterialPTFE Product
Features Can be combined with 4.3-10, 7-16 DIN, BNC, N, NEX10,
QMA or SMA connector;Body Can be 4 hole panel, bulkhead or standard
mount connectors;Body Can be right angle or straight
connectors;Cable Can use corrugated, flexible, formable or
semirigid cable. Related Products RF
connectors are used to connect cables to other devices and are
specifically designed to maintain the shielding on the cable.
High-quality connectors offer reliable, long-lasting connections,
Low Pim Connectors. There are two distinct connector
styles; male and female. Male connectors have a protruding metal
pin in the center, whereas female connectors have a receptacle to
receive that pin. Depending on the connector size and frequency,
some may be sexless and mounted flush instead of mating.
Within digital, video, audio, Network,RF Coaxial system, and
microwave industries, there are several varieties of coaxial cable
connector types. Each offers unique benefits based on the end use
or application. Below are some of the most common coaxial connector
types, along with their distinguishing characteristics and intended
applications,DIN 7-16, N, 4.3-10, BNC, SMA, NEX10, MCX, TNC, QMA,
IPEX/U.FL etc. RF Cable Assemblies high-frequency
cables are suitable for low-loss and distortion-free transmission
of high-frequency signals. The fastest transmission of data takes
place directly which is why assembled coaxial cables from ROHO
ensure powerful and uncomplicated data communication. The shielded
design makes ROHO assembled coaxial cables far less sensitive to
external interferences such as damage or electromagnetic fields.
Wired solutions are suitable for highly complex infrastructures
where flexibility, security and performance count, such as
measurement lines in test laboratories. Furthermore, they are used
in electrical and radio technology, communication and data
technology - all areas where high demands on transmission quality
or shielding are made. The product range incorporates
all commonly available RF cable assemblies and the development of
customized solutions from DC up to 50 GHz. ROHO offers
RF adapters design as well as T and Cross RF adapters. RF adapters
include some connectors interface types such as SMA,TNC, N, BNC,
SMP, 4.3-10, DIN 7-16, 2.92mm, 3.5mm, NEX10, QMA ,MCX, UHF and
F. RF adapters are available in male, female, plug,
jack, receptacle or sexless gender, in 50 Ohm, 75 Ohm, 78 Ohm or 95
Ohm impedance and in standard polarity or reverse polarity. RF
adapters are available in quick disconnect (QD), push-on or
standard interface as well as straight, 45 degrees right, radius
right angle or right angle versions. ROHO offers RF adapters in
standard and high performance with brass and stainless steel body
as well as some hermetic, bulkhead or 4 hole panel
configurations. An antenna is an array of conductors
(elements), electrically connected to the receiver or transmitter.
Antennas can be designed to transmit and receive radio waves in all
horizontal directions equally (omnidirectional antennas), or
preferentially in a particular direction (directional, or
high-gain, or "beam" antennas). An antenna may include components
not connected to the transmitter, parabolic reflectors, horns, or
parasitic elements, which serve to direct the radio waves into a
beam or other desired radiation pattern. Strong directivity and
good efficiency when transmitting are hard to achieve with antennas
with dimensions that are much smaller than a half wavelength.
RF attenuators act as resistors and are used to reduce the
level of a signal within radio frequency applications and RF
circuits. They have many benefits, including protecting a circuit
stage from receiving a current that's too high. RF attenuators can
also improve impedance match, ensuring power transfer from source
to load is optimised. RF attenuators come in three
types: Fixed RF attenuators provide an unchanging
value where specific attenuation levels are needed.
Switched RF attenuators are made up of switches that allow varying
levels of attenuation. Variable RF attenuators are
used when it's necessary to continuously change the level of a
signal. RF Terminators (also called RF loads or dummy
loads) are applied to an open end of a transmission line, e.g. an
RF port, to prevent the back-reflection of an RF signal. They are
used in a large variety of test and measurement, defense and
communication applications. RF load terminations are
available in 2.4mm, 2.92mm, 7/16 DIN, BNC, C, Mini SMB, Mini SMP,
N,
Related products about RF Coaxial 7-16 DIN Female 4 Hole Flange Connector with 086 Cable Assembly
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup