Basic Info.Model NO.Universal JointAfter-sales Service1
YearWarranty1 YearConditionNewColorNatural Color, Silver,
BlackCertificationDIN, ISOStructureSingleMaterialAlloy
SteelTypeNeedle RollerBore14mmMaximum Working Angle45°Maximum
Speed4000rpmTrademarkEED/OEMTransport PackageCarton Box Wooden
CaseSpecification05G/E16X32-GOriginZhejiang, ChinaHS
Code8483600090Product DescriptionPrecision Universal Shaft
Coupling Features:1.Universal joint pins, bushings and blocks
are made high quality alloy steel.2.All parts of the universal
joint can be customized with SUS304 SUS316 stainless
steel.3.Universal joint two axle bushing can be customized with
high strength aluminum alloy, or insulation nylon
customization.4.The onnection made at both ends can be made into
internal spline shaft hole, spline shaft, optical shaft plus pin
hole, optical shaft pus keyway square shaft, hexagonal shaft, small
flange and other forms, specific parameters please call to
consult.Universal JointsA universal joint is a mechanical joint
used for connecting two shafts or rods whose axes are inclined at
an angle to each other. The universal joint compensates for the
angular misalignment and allows the shafts freedom of movement in
any direction while transmitting rotary motion. The universal joint
consists of a pair of hinges or fork shapes yokes oriented at 90°
to one another and connected by a cross shaft. These joints are
commonly used for connecting line shafts, drive shafts, conveyors
and most types of rotating machinery to a prime mover. The
universal joint is also known as a universal coupling, U-joint,
cardon Joint and hookes joint.Types of Universal JointSingle Joint:
This has one bending point and can operate at angles of up to 45°.
This type of joint can accept up to 25° operating angle
misalignment between the two shafts or rods from the central
section. This joint is suitable for use in slow speed
applications.Double Joint: This has two bending points and can
operate at angles of up to 90°. This type of joint can accept up to
0° to 45° operating angle misalignment between the two shafts or
rods from the central section. The advantage of the double
universal joint is that it can also compensate for parallel
misalignment.Hub Styles Universal joints are available with four
hub styles:Solid: these do not have a machined holeBored: have a
round, hex or square shaped holeSplined: these have longitudinal
grooves inside the boreKeyed: these have keying to prevent the
universal joint rotating on the shaftBearing Types Universal joints
are available with two types of bearings:Plain Bearings: these are
suitable for low speed applications and can support shock loads,
motion reversals, irregular running and high torques.Needle Roller
Bearings: these are suitable for high rotational speeds, low
torques and wide angles.The choice of universal joint material
depends on the application they are going to be used in: Steel
offers the ability to handle greater torque and temperature.
Plastic offers rust corrosion and electrical and magnetic
insulation. Universal joints can be used in a wide range of
applications including drive shafts, automotive propeller shafts,
centrifugal fans and centrifugal pumps, belt conveyors, control
mechanisms, marine equipment and metal forming machinery.
Related products about 05g Precision Single Joint Type G Single Universal Joint E16X32-G
- Aluminum Casting Worm Gearbox
- EPS Series Eed Planetary Gearbox Reducer
- Eed Transmission-High Precision Low Noise Helical Gear Planetary Speed Reducer Gearbox for Servo Motor Precision Gearbox Frame Size 090
- E-R 97 Series Helical Speed Reducer
- K 57 Helical-Bevel Geared Motor
- Xingda Machinery Single Wpwdk Series Wpwks Size 120
- Eed Transmission E-Vf 050 Worm Gearbox Reducer
- Xingda Machinery Udl 5.5 B3 Series Worm Gearbox