Basic Info.Model NO.HSK14016After-sales ServiceHalf
YearsWarrantyTs16949TypeFuel FilterMaterial Plastic StructurePanel
FilterFiltration GradeHepa
FilterApplicationAirPatternDryBrandOLANDEClassificationAir
FilterTransport
PackageFreightSpecificationcustomizationOriginChinaHS
Code848071009Product DescriptionProduct nameCustom CNC machining
plastic Car dashboard frameMaterialABS, PP, Nylon, PC, POM, PU,
TPU, TPV, PBT, PC+ABS, PE, PA6Weight2g-20kgDrawingProvide by
customer(DXF/DWG/PRT/SAT/IGES/STEP etc),Or design according as the
sampleEquipmentInjection molding machineSurface
treatmentElectroplate,paint sprayingApplicationAuto parts,auto door
handle,Car tank cap, housing/cover/case/base, telescope, daily
goods, home&office appliances, other industrial spare parts,
customizedQuality100% inspection before shippingPackingCarton
packaging, or PVC bag with a label; Wooden pallet; as
customer's requirementServiceOEM service available, High
Quality Competitive Price prompt delivery. 24-hour service with
prompt replyInjection moulding specific systematic processes1.
Pouring systemIt refers to the part of the flow channel before the
plastic enters the cavity from the nozzle, including the main flow
channel, the cold feed hole, the diverter, and the gate, among
others.2. Molding parts system:It refers to the combination of
various parts that constitute the shape of the product, including
moving die, fixed die and cavity (concave die), core (punch die),
molding rod, etc. The inner surface of the core is formed, and the
outer surface shape of the cavity (concave die) is formed. After
the die is closed, the core and cavity form a die cavity.
Occasionally, according to process and manufacturing requirements,
the core and die are made from a combination of working blocks,
frequently from a single piece, and only in the easily damaged and
difficult-to-work parts of the insert3, the temperature control
system.In order to meet the injection process temperature
requirements of the die, it is necessary to have a temperature
control system to regulate the temperature of the die. For
thermoplastic injection mold, the main design of the cooling system
to cool the mold (can also be heated the mold). A common method of
cooling molds is to set up a channel of cooling water in the mold
and use the circulating cooling water to remove the heat from the
mold. In addition to heating the mold, cooling water can be used to
pass hot water or hot oil through, and electric heating elements
can be installed inside and around the mold.4. Exhaust system:It is
set so as to exclude air in the cavity and gases from plastic
melting during injection into the mold.. When the exhaust is not
smooth, the surface of the product will form air marks (gas lines),
burning and other bad; The exhaust system of a plastic die is
usually a groove-shaped air outlet built into the die to expel the
air from the original cavity and the gases brought in by the molten
material..When the molten material is injected into the cavity, the
original air in the cavity and the gas brought by the melt must be
discharged to the outside of the mold through the exhaust port at
the end of the material flow, otherwise it will make the products
with pores, poor connection, mold filling dissatisfaction, and even
the accumulated air will be burned due to elevated temperature
caused by compression. under normal conditions, the vent can be
located in the cavity at the end of the flow of molten material, or
in the parting surface of the die.The latter is a shallow groove
with a depth of 0.03 - 0.2 mm and a width of 1.5 - 6 mm on the side
of the die..There will not be a large amount of molten material
oozing out of the vent during the injection, as the molten material
will cool and solidify in the channel here..The opening position of
the exhaust port should not be directed at the operator to prevent
accidental ejection of molten material.. alternatively, it can
exhaust the gas using the matching gap between the ejector bar and
the ejector hole, and between the ejector clump and the template
and core.5. Guiding system:This is set up to ensure that the moving
and fixed modes can be accurately aligned when the mode is turned
off..The guiding part must be set in the mold..In injection, the
moulds are normally formed using four sets of guide columns and
guide sleeves, and occasionally it is necessary to set up in moving
and fixed moulds, respectively, with the inner and outer conical
faces of each other to assist in positioning.6. Ejection
system:Examples include: thimbles, front and back thimbles,
thimbles guides, thimbles reset springs, thimbles lock screws,
etc..When the product is formed and cooled in the mold, the front
and back of the mold are separated and opened, and the plastic
products and their coagulant in the flow channel are pushed out or
pulled out the mold opening and flow channel position by the
ejector rod of the injection molding machine, so as to carry out
the next injection m
Related products about Car Parts Electric Scooter Shock Absorber Ball Joint Half Shaft
- Portable Power Station Outdoor 600W Power Backup Plastic Injection Moulding
- Portable Power Station Outdoor 600W Power Backup Plastic Injection Moulding
- Nylon Car Part, Auto Chassis Parts Car Accessories Plastic Injection Moulding
- Nylon Car Part, Auto Chassis Parts Car Accessories Plastic Injection Moulding
- 1500W Lithium Ion Battery Power Bank Plastic Enclosure Moulds
- Outdoor Power Bank Portable Power Station Lithium Battery Bank
- Custom Ventilator Plastic Professional Plastic Injection Mold Plastic Enclosure
- Custom Injection Molding Printer Case Plastic Housing Professional Injection Mold