DescriptionSurtek 3546 is a one-part polyurethane adhesive for
direct elastic bonding of timber floors. The adhesive is of low
viscosity and cures on exposure to atmospheric
moisture. Advantages1-component, ready to
useSolvent freeFast curing propertiesFloor can be sanded
after 12 hours (full surface bonding,+23°C/50%r.h., up to
1 mm adhesive thickness)Excellent workability, very
easy to extrudeGood initial tackOdorlessElastic, footfall
sound-dampening adhesiveSuitable for most common types of
wood floorsEspecially suitable for problematic
woods including beech, maple and bambooSuitable
for bonding wood floors directly onto old ceramic tilesReduces
stress to the substrate: the elastic adhesive reduces stress
transfer between the wood floor and the substrateSuitable for
use with sub floor heatingCompensates for some substrate
unevennessAdhesive can be sandedTechnical Data of Surtek
3546ColorParquet brownPackaging600ml sausages (20sausages per box).
/ 25kg barrelChemicalBase1-part Polyurethane, moisture
curing.Density (DIN 53479)~1.40kg/LSkinning-/Laying Time~50 minutes
(+23°C/50%r.h.)CuringRate~2.5 mm/24h (+23°C/50%r.h.)The floor may
be walked or sanded 12 hours to 24 hour safter installation
(+23°C/50%r.h.up to1 mm adhesive thickness dependent on climatic
conditions and adhesive layer thickness).SagFlowConsistency:Spreads
easily, trowel marks stable. Easily applied by guns.Service
Temperature-40°C to +80°CShear Strength~0.8
N/mm2 (+23°C/50%r.h.)TensileStrength~1.0 N/mm^2
(+23°C/50%r.h.)Shore A Hardness~ 42ElongationatBreak~550%Detailed
Image Application FieldsFor Full Surface bonding:
Solid and engineered wood floors-(strips, longstrips,
planks, panels, boards), mosaic parquet, industrial
parquet, lam parquet, wood paving (residential) as well as chip
boards can all be fully bonded Elastic Bonding of skirting boards/
baseboards and door thresholds etc.
Application DetailsConsumption: Full Surface Bonding:
700 - 900 g/m2 with notched trowel B3 (acc. To IVK guidelines)
or 3/16" 1/8" 1/8" (engineered strips
/ planks, mosaic parquet etc.). 800 - 1000 g/m2 with
notched trowel B11 (acc. to IVK guidelines), AP 48 or
3/16" 3/16" 3/16" (solid wood,engineered planks /
panels, industrial parquet, wood paving (residential),
chipboards etc.). For bonding of long or wide boards or on
uneven substrates it may be necessary to use
a notched trowel
with biggernotches (to prevent hollow sections).
Beaded Application: ~ 44 ml per running meter
= 250 - 500 g/m2, dependent on bead spacing
(solid wood boards, 3-ply engineered wood,chipboards).
Substrate Quality: Clean and dry, homogeneous, even, free from
grease, dust and loose particles. Paint, laitance and other poorly
adhering particles must be removed. Standard construction rules
must be observed. Application InstructionsApplication: Full
Surface Bonding: Surtek 3546 is applied to the prepared
substrate directly from the pail and uniformly
distributed by notched trowel. Press the wood floor
pieces firmly into the adhesive so that the
underside is fully wetted. The pieces can then be joined
together using a hammer and an impact block. Many types of wood
floors have to be tapped from the top.
A distanceof 10 - 15 mm from the
wall to the wood floor must be maintained.
Beaded Application: After inserting the sausage
into the gun, extrude a triangular shaped bead
of adhesive approximately 10 mm high and
8mm wide at 100 - 250 mm centres (dependent on wood
floor type) on the prepared sub floor. Press the wood
piecesfirmly into the adhesive (at right angles to the
adhesive beads). The elements can then
be joined together using a hammer and an impact block.
The required distance from the wall to the wood floor
in the laying instructions from the wood
floor manufacturer must be maintained.
Note: The laying instructions of the wood
floor manufacturer must be observed.
Packaging600 ml sausages (20 sausages
per box). Storage and Shelf Life9 months from date
of production if stored in undamaged, original sealed
containers, in dry conditions and protected from direct sunlight
at temperatures between+10°C and+25°C. FAQ/* January
22, 2024 19:08:37 */!function(){function s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about One-Part Polyurethane Adhesive Sealant Glue for Direct Elastic Bonding of Timber Wood Floors
- Self-Leveling Moisture Curable PU (Polyurethane) Waterproof Membrane (Comensflex 8269)
- Weather Resistant PU Adhesive for Artificial Grass Installation with CE/ISO (Flexibond 8010)
- Weather Resistant PU Adhesive for Artificial Grass Installation with CE/ISO (Flexibond 8010)
- Third Generation Acrylic Structural Adhesive for Composite Materials
- Two-Part Acrylic Adhesive for Metal-Bonding (PT805)
- Two Component Modified Polyurethane Elastic High Temperature Resistant Adhesive for Bonding Vehicle Body-on-Frame/ Unibody Construction/ Monocoque SMC
- Multi-Purpose Polyurethane Sealant for Construction Sheet Metal Roofs Window Perimeters Sealing and Bonding
- Excellent Bead Stability Single Component Polyurethane Sealant for Wood Floor Installation